Wednesday, May 22, 2013

Quilted Mat Sew Along - Tutorial 2 - Basting and Quilting

Your quilt top is done! You can check out Part 1 here. Now it's time to move on to the next step of the Sew Along which will be new to you if this is your first quilted project.


For this part, you will need:
  • your finished quilt top
  • batting
  • backing fabric
  • basting pins
  • rotary cutter and ruler
  • sewing machine and thread to quilt with (you might choose a particular colour)
  • walking foot (optional)
First, we will baste the quilt. Basting is the process of making a 'sandwich' with the backing fabric, the batting and the quilt top.

I used a scrappy piece of batting, so the first thing I did was to trim up my batting using my quilt top as a guide. I left an extra half inch all around the side.


Now you need to sandwich your layers together. Lay your backing fabric right side down on your work surface. Make sure it is pressed and sits nice and flat. Lay your batting down over the top. The batting will stick to your backing fabric, so flip it over and smooth out the backing fabric, making sure there are no ripples or bubbles. Flip it back again and lay your quilt top over the top. Smooth it over with your hands.


Next you are going to baste the layers together with pins. The pins you need are like safety pins with a small curve in them, so they easily go in through the layers and back up to the surface.


 Place one or two pins per square, carefully placing them so they don't get in the way of where you plan to quilt. For this project I have quilted either side of each seam, so I have pinned right in the middle of each square.




Once your pins are in place you are ready to quilt!

Get your machine set up and set on a straight stitch. I like to quilt on a slightly longer stitch that I piece with. I piece using a 2.5-2.8 length stitch, and I quilt using about a 3.2 length stitch. If you have a walking foot, great, but if not, that is fine - I made my entire first quilt using my regular presser foot. You might get a few little pinches near seams, but don't worry.


I quilted straight lines down either side of every seam. I used my presser foot as the guide so I would achieve the same distance between the seam and stitching across the whole mat.

Once you've stitched your quilting lines, your mat will look like this:


Once you have finished, you can remove all your basting pins. The next part is to square off and neaten all your mat edges. Use a ruler and your rotary cutter and trim all the excess batting and backing fabric away from the edges.


 Now your mat is all pretty and quilted and ready for binding!


 Now show me some pics! I'd love to see your progress. Share on Instagram using the hashtag #matsewalong, post it on my facebook page or upload a pic in the Sew Delicious flickr group.

See you on Friday for the last part - the binding!

If you are participating you can grab this button!

Sew Delicious Sew Along

8 comments:

  1. Here goes! :)

    *Skips away to her sewing room*

    ReplyDelete
  2. Great tutorial, Ros!

    I've blogged mine already. Will go back and add the badge you created soon.

    ReplyDelete
  3. Will be working on this today. Ros I think I'm slightly addicted - I've made 2 mats and have plans to make more! I'll post my second mat on Flickr and your FB page in a minute...

    Sophie xo

    ReplyDelete
  4. Oh! I want to start now, but I have to go to my anti-natal appointment first.... boo!
    I had one of those lightbulb moments reading this part and seeing that you pin each square.... I was like "Ohhhhh, that's how it's done!" haha.
    You really do learn something new each day ;-)

    ReplyDelete
  5. so beautiful photos!MMM,I have to say as a beginner in quilting too that I hate safety pins but I love basting spray,it makes the whole procedure so easier!:)

    ReplyDelete
    Replies
    1. I've never tried basting spray - I've heard mixed reports! For this project I thought I would just suggest pins as they are probably a bit easier for beginners to work with :)

      Delete
    2. I used the pins, and they've left holes in my fabric :-(
      I think I'll try the spray next time.

      But other than that it's gone great!

      Delete
  6. Great tutorial Ros! I'm off to Spotlight today for a little batting. I've run out! Ros I'm having a little trouble with your Sew Along Button. I can't seem to add it to my blog side bar. Is it just me or has everyone else seemed to manage it fine? I like to show off where I'm joining in on my side bar.

    Sophie xo

    ReplyDelete

Thank you so much for your comments - I adore hearing from you! I love to reply personally via email so if your email isn't visible in your profile feel free to leave it in your message so I can get in touch!

Related Posts Plugin for WordPress, Blogger...